• 

• Beak shaped structure and flexible nose clip to enhance coverage.
• Up to 30 times of repeated use, making it eco-friendly and cost efficient.

• Four-Layered Structure to block virus completely.

  1. The mesh non-woven fabric (first layer)
  2. Antibacterial nano-mesh structure (second layer)
  3. The melt-blown non-woven fabric (third layer)
  4. The forth layer consists of a unique woven fabric to enhance the durability of the mask so that it can be used repeatedly.
• The filtration efficiency rate exceeds 99.728% based on the NIOSH Respirator Certification Sodium Chloride test conducted by Nelson Labs.
• Mask Measures 205mm width when opened is approximately 90mm deep and has a height of 90mm.
• Material: polypropylene, polyurethane, polyethylene.
• Quantity: 3 pieces per pack.

• 
• 
• 
• 
• 

The FSC-F-99E® model of mask offers exceptional protection due to its 4-layered structure and antibacterial nano-mesh.

The following is a more detailed analysis of the 4 layered structure:

1. The first layer (a mesh non-woven fabric) and the second layer (an antibacterial nano-mesh structure) filters out most viruses.
2. The third layer (a melt-blown non-woven filter) is charged with static electricity ensuring filtration of other viruses which may have passed through the first two layers.
3. The forth layer consists of a unique non-woven fabric to enhance the durability of the mask so that it can be used repeatedly. It is also designed to help adherence between the mask and face.
4. A nose clip on top of the mask is made of memory-foam plastic and for those who wear glasses the sponge used on the clip can help avoid glass fog-up.

This re-usable mask has been developed under co-operation with some of the leading specialists in Environmental Infection Science.

FSC-F-99E® masks meet the standards set by the World Health Organisation (WHO) for protection against pandemic and highly toxic viruses such as the h1n1 virus (swine flu) and the h5n1 virus (avian flu). Our respiratory face masks are designed to offer reliable protection for healthy individuals of the general public against swine-flu and other airborne contaminated particulates which may circulate during close contact with infected persons.

99.7% of particles from the coughing and sneezing of infected persons can be filtered out with this face-mask and discomfort in respiration which is sometimes accompanied with long-term use of respirator-masks is designed to be kept to a minimum.

The WHO is recommending NIOSH (National Institute for Occupational Safety and Health in US) the use of certified N99 surgical face masks and FFP2 (European equivalent to NIOSH) or higher certified respirator masks. Our FSC-F-99E® masks comply with both of these international standards.

Although wearing FFP2 certified masks protect healthy individuals from the risk of airborne contamination, it does not guarantee full immunity against swine flu and avian flu. The WHO advises that a combination of FFP2 mask, safety goggles and gloves should be used in the event of exposure to infected aerosol.

Product is manufactured under hygienically controlled conditions in Shanghai, China.

sample ID	primary flow resistance(mmH2O)	VFE(%)	N99 tolerable level
1	11.7	99.882	pass
2	11.5	99.873	pass
3	12	99.958	pass
4	12.3	99.894	pass
5	12.3	99.940	pass
6	11.7	99.941	pass
7	11.8	99.799	pass
8	12.3	99.862	pass
9	12.3	99.926	pass
10	12.5	99.858	pass
11	11.7	99.897	pass
12	11.2	99.881	pass
13	12.6	99.944	pass
14	11.4	99.911	pass
15	11.6	99.728	pass
16	11.9	99.872	pass
17	12.2	99.934	pass
18	11.8	99.897	pass
19	12.4	99.909	pass
20	12.2	99.928	pass

Directions: For the most effective protection, please follow these instructions carefully.

1. 

   Take the two sides apart from each other and form the nose clip to the shape of your nose.

2. 

   Take the two elastic bands, stretch them carefully and place over your head making sure that one of them is fitting around the ears and the other is placed at the top of the head.

3. 

   Adjust the mask to your face shape ensuring that it is covering nose and mouth tightly.

4. 

   Place the nose clip on the nose bridge, making sure that no air can get inside the mask.

Warnings:

• It is Recommended to prepare at least 3 masks for 1 person. Do not exceed the use of one mask continuously for more than 12 hours. Allow your mask to dry in the shade for at least 48 hours before its next use.
• For repeated usage, do not re-use any particular mask more than 30 times.
• NOT suitable for washing.
• Effectiveness may be reduced according to usage.
• NOT suitable for protection against gases, vapors and fumes.
• Consult with your doctor if you experience any discomfort or distress while using a mask.

Because of the concern that a new virus could mutate over time and become more virulent and less susceptible to new vaccines, we believe that using masks that can prevent airborne contamination is the most cost-effective and permanent solution for protecting humans against viruses.

This particular model of mask has been developed under the strict supervision of professor Hayashi of Kyushu University in Japan who is a leading specialist in Environmental Infection Science together with cooperation of the Fudan University in Shanghai which is very highly regarded for its advances in Material Science Technology.

Specifications for this model of Mask can be downloaded in PDF Format here.